The design of this machine went through a lot of technical innovations which increased the useful featurettes of the machine. Quality processing ranks this spindle moulder among the best in its class. The massive cast iron spindle fixed on the cast iron table creates a sufficiently solid unit to ensure exceptional quality conditions for milling. The design of the machine allows the use of cutters with a diameter up to 350 mm, which are used in the production of doors and windows. The speed is shifted mechanically after opening the lower cover and releasing the tensioning mechanism.
TECHNICAL DATA
Spindle moulder | |
Motor power S6 40% | 7,5 kW (9,2 kW) |
Motor speeds | 2 900/min.(3 480/min.[60Hz]) |
Spindle diameter | 40 mm (30 | 50 | 32 | 35 mm) |
Spindle speeds | 3 000; 4 500; 6 000; 8 000; 10 000/min. |
Max. spindle stroke | 200 mm |
Spindle length | 233 mm (193 | 263 | 193 | 193 mm) |
Max. tool height | 180 mm (140 | 220 | 140 | 140 mm) |
Max. diameter of table opening | 330 mm |
Max. tool diameter under the table | 320 mm |
Max./min. tool diameter for profiling | 250 / 80 mm |
Max./min. tool diameter for tenoning | 350 / 80 mm |
Machine dimensions | |
Length | 2 510 mm |
Length with sliding table | 3 270 mm |
Width | 1 020 mm |
Width with sliding table | 2 035 mm |
Table height | 900 mm |
Max. height of machine | 1 320 mm |
Table size | 1 200 x 780 mm |
Size of front table extension | 658 x 450 mm |
Size of tenoning table | 1 050 x 330 mm |
Height of tenoning table | 947 mm |
Turn of tenoning table | +60° ÷ -90° |
Travel of tenoning table | 1 470 mm |
Suction dust hood diameter | 120 mm |
Dimensions with packing | 1 020 x 2 510 x 1 320 mm |
Gross weight | 930 kg |
Nett weight | 925 kg |
Other parameters | |
Voltage / frequency | 3x400V (3x230V) / 50(60)Hz |
Line safeguarding | 25 A |
Noise level (without technology) | 81,5 dB(A) |
Noise level (with technology) | 91,4 dB(A) |
Acustic achievement | 89,5 dB(A) |
Acustic achievement (with technology) | 98,7 dB(A) |
- 12 months
- Cast iron table
- Ability to work with large diameter cutters
- Pivoted tenoning table
- It is possible to reach total lenght 2500 mm with table extension on both sides
- Cast iron pull-out table for quick tool change
- The perfect solution for profiling and tenoning
- Standard equipment includes tilting wheel with angle indication, MORI support cover with wooden rullers.
- Table extension right
- Table extension left (without tenoning table CV6)
- Front table extension incl. roller (must be ordered with R table extension)
- CV6 – tenoning table
- Tenoning cover
- CPS – Safety protection for round profiles
- Revolving tenoning stop
- Outrigger roller for cast iron table
- Pneumatic pressure for tenoning table CV6 – 1 pressure unit
- Pneumatic pressure for tenoning table CV6 – 2 pressure units
- Spindle diameter – on request (D= 32;D=35;D=40;D=50 mm; D=5/4; D=1inch.)
- Upper control panel
- Electric spindle stroke (with upper control panel only)
- Feeding devices
- Three-phase motor 12,5 HP (9,2 kW, S6/40%), 400V, 50 Hz