The design of this machine went through a lot of technical innovations which increased the useful featurettes of the machine. Quality processing ranks this spindle moulder among the best in its class. It is especially popular among smaller and middle-sized producers. It is equipped with a sliding table with very precise and solid mounting on steel round bars CV 360T in basic version.
The spindle mounting in a robust tilting cast iron body guarantees accuracy, solidity, and reliability.
TECHNICAL DATA
| Spindle moulder | |
| Motor power S6 40% | 4,4 kW/3x400V (2,2 kW/1x230V) |
| Motor speeds | 2 840/min.(3 410/min.[60Hz]) |
| Spindle diameter | Ø 30 mm (32 | 40 | 50 ) |
| Spindle speeds | 2 500; 3 500; 6 000; 8 000; 10 000/min. |
| Max. spindle stroke | 140 mm |
| Spindle length | 130 mm |
| Spindle tilting | -5° ÷ +45° |
| Max. diameter of table opening | Ø 220 mm |
| Max. tool diameter under the table | Ø 175 mm |
| Max. tool diameter above the table | Ø 200 mm |
| Machine dimensions | |
| Length (with CV360T – 1 200 mm) | 1 700 mm |
| Length (with CV360T – 2 000 mm) | 2 300 mm |
| Width | 800 mm |
| Width with support frame | 1 980 mm |
| Table height | 897 mm |
| Max. height of machine | 1 300 mm |
| Table size | 1 000 x 350 mm |
| Suction dust hood diameter | 100 mm |
| Gross weight | 275 kg |
| Nett weight | 275 kg |
| Alu sliding table CV360T | |
| Table size | 360 x 1 200 (2 000) mm |
| Travel length | 1 370 (2 170) mm |
| Dimensions of supporting frame | 870 x 630 mm |
| Other parameters | |
| Voltage / frequency | 3x400V (3x230V | 1x230V) / 50(60)Hz |
| Line safeguarding | 16 A (25 A) |
| Noise level (without technology) | 70,4 dB(A) |
| Noise level (with technology) | 83,0 dB(A) |
| Acustic achievement | 78,6 dB(A) |
| Acustic achievement (with technology) | 88,5 dB(A) |
- 12 months
- Aluminium sliding table on steel bars CV 360T/ 1,2 m
- Three-phase motor 400 V, 50 Hz (S6/40%) 4,4 kW
- Aluminium sliding table complete with angle fence and steel table
- Spindle moulder fence with adjustable extensions
- Switch for reversation of the spindle
- Spindle moulder wooden fences of the wood presser
- Emergency stop
- Overload protection
- CE standards
- Service spanners
- Instruction handbook
- Spindle moulder with lower suction
- Spindle lock for 0°, -5°, 45°
- Packing in PE foil
- Aluminium sliding table on steel bars CV 360T/ 2,0m
- Support of sliding table
- Cross-cutting frame complete with telescopic fence and 2 flip over stops
- Right and left table extension
- Modification for interchangeable spindle (included spindle 30 mm )
- Extra interchangeable spindle – on request (D=30; D= 32; D=35; D=40; D=50 mm; D=5/4 inch.)
- Extra interchangeable spindle with chuck for router bits – on request (D = 30; D=32; D=35; D=40; D=50 mm; D=5/4 inch.)
- Single-phase motor 3 HP, 230 V, 50 Hz (2,2 kW) – or other voltage – or 60Hz
You can also be interested
