The design of this machine went through a lot of technical innovations which increased the useful featurettes of the machine. Quality processing ranks this spindle moulder among the best in its class. It is especially popular among smaller and middle-sized producers. It is equipped with a sliding table with very precise and solid mounting on steel round bars CV 360T in basic version.
The spindle mounting in a robust tilting cast iron body guarantees accuracy, solidity, and reliability.
TECHNICAL DATA
Spindle moulder | |
Motor power S6 40% | 5,3 kW (7,5 kW) |
Motor speeds | 2 900/ min. |
Spindle diameter | 30 (32 |35 | 40 | 50 ) mm |
Spindle speeds | 3 500; 6 000; 8 000; 10 000 (12 500)/ min. |
Spindle tilting | -5° ÷ +45° |
Max. spindle stroke | 142 mm |
Max. tool height | 140 mm (180 | 220) |
Max. diameter of table opening | 260 mm |
Max. tool diameter under the table | 250 mm |
Max./min. tool diameter for profiling | 250 / 80 mm |
Max./min. tool diameter for tenoning | 275 / 80 mm |
Machine dimensions | |
Length (with CV360T – 1 200 mm) | 1 360 mm |
Length (with CV360T – 2 000 mm) | 2 160 mm |
Width | 1 050 mm |
Width with support frame | 2 220 mm |
Table height | 900 mm |
Max. height of machine | 1 320 mm |
Table size | 1 000 x 520 mm |
Suction dust hood diameter | 120 / 80 mm |
Gross weight | 410 kg |
Nett weight | 405 kg |
Alu sliding table CV360T | |
Table size | 360 x 1 200 (2 000) mm |
Travel length | 1 500 (2 300) mm |
Dimensions of supporting frame | 870 x 630 mm |
Other parameters | |
Voltage / frequency | 3x400V (3x230V) / 50(60)Hz |
Line safeguarding | 25 A |
Noise level (without technology) | dB(A) |
Noise level (with technology) | dB(A) |
Acustic achievement | dB(A) |
Acustic achievement (with technology) | dB(A) |
- 12 months
- Aluminium sliding table on steel bars CV 360T/ 1,2 m
- Three-phase motor 400 V, 50 Hz (S6/40%) 5,3 kW
- Aluminium sliding table complete with angle fence and steel bars
- Spindle moulder fence with adjustable extensions
- Switch for reversation of the spindle
- Spindle moulder wooden fences of the wood presser
- Emergency stop
- Overload protection
- CE standards
- Service spanners
- Instruction handbook
- Spindle moulder with lower suction
- Spindle lock for 0°, -5°, 45°
- Packing in PE foil
- Aluminium sliding table on steel bars CV 360T/ 2,0m
- Table extension left + right
- Cross-cutting frame complete with telescopic arm and fence with 2 flip over stops
- Tennoning plate
- Tenoning cover
- CPS – Safety protection for round profiles
- Outrigger roller
- Electric spindle stroke
- Spindle diameter – on request (D= 32;D=35;D=40;D=50 mm; D=5/4; D=1inch.)
- Interchangeable spindle
- Modification for interchangeable spindle (included spindle 30 mm )
- Extra interchangeable spindle – on request (D=30; D= 32; D=35; D=40; D=50 mm; D=5/4 inch.)
- Extra interchangeable spindle with chuck for router bits – on request (D = 30; D=32; D=35; D=40; D=50 mm; D=5/4 inch.)
- Feeding devices
- Three-phase motor 10,2 HP (7,5 kW, S6/40%), 400V, 50 Hz